Personal Safety Requirements; Protective Equipment; Accident Prevention; Safety Procedures - probst SAFEFLEX SF Betriebsanleitung

Safety
1.3

Personal safety requirements

Each operator must have read and understood the operating instructions (and all safety instructions).
Only qualified, authorized personal is allowed to operate the device and all devices which are connected
(lifting device/carrier).
The manual guiding is only allowed for devices with handles.
1.4

Protective equipment

The protective equipment must consist, according to the safety
regulations of the following parts:
1.5

Accident prevention


The workplace has to be covered for unauthorized persons, especially children.

Take care in case of thunderstorm!

The workplace has to be sufficiently illuminated.

Take care with handling wet, dirty and not solidified components.

The working with the device in case of atmospheric editions under 3 °C (37,5 °F) is forbidden!
Because the goods could be fall down caused by dampness or freezing.
1.6

Safety procedures


Before working with the device it is necessary to read and follow the instructions of the
cutter/angle grinder.

Cutter/angle grinder should only be operated by persons, which are familiar with the device and its
handling.

When the Cutter/angle grinder is not in use, it has to be put down in such a way, so nobody can be
threatened by it. Protect the device from unathorized access.

Operating of noise-emmitting devices may be limited in time by national or local regulations.
5121.0001

Protective clothing

Safety gloves

Safety shoes

Hearing and eye protection

Respiratory protection
V1
4 / 9
GB