Eu Declaration Of Conformity - Watt Drive HF 70A 3B 100L-04E TH FL IG Montageanleitung

Products of the gear unit series WG20/MAS:
 Helical gear unit with motor adapter or input shaft
Shaft mounted gear unit with motor adapter or input shaft

Parallel shaft gear unit with motor adapter or input shaft

 Helical worm gear unit with motor adapter or input shaft
 Helical bevel gear unit with motor adapter or input shaft
 Angle parallel shaft gear unit with motor adapter or input shaft
Producer: WATT DRIVE Antriebstechnik GmbH,
Wöllersdorfer Straße 68
2753 Markt Piesting - Austria
The manufacturer declares the sole responsibility for the above-mentioned products for:
 Zone 1 and 21, Device Group II, Category 2G and 2D
 Zone 2 and 22, Device Group II, Category 3G and 3D
Marking:
 II 2G Ex h IIC T4 Gb
 II 2D Ex h IIIC T125°C Db
 II 3G Ex h IIC T4 Gc
 II 3D Ex h IIIC T125°C Dc
Applied harmonized standards:
 EN 80079-36:2016
 EN 80079-37:2016
WATT DRIVE Antriebstechnik GmbH deposits the required documents according to 2014/34/EU at the notified body:
TÜV Austria, No. 0408
Markt Piesting, 18.02.2020
Place and date of issue
Watt Drive Antriebstechnik GmbH · Wöllersdorfer Str. 68 · 2753 Markt Piesting · Austria · Phone: +43(0)2633 404-0 · Mail: info-at@weg.net · Web: www.wattdrive.com
Montageanleitung für MAS
Mounting Instruction for MAS
EU - Declaration of Conformity
in terms of the EU Directive on Explosion Protection 2014/34/EU
®
- Getriebe und Getriebemotoren
®
- Gear units and geared motors
Classification:
Klaus Sirrenberg – Managing Director
C./H.
- /A.
F./F.
- /S.
K./K.
- /C.
65