Watt Drive HF 70A 3B 100L-04E TH FL IG Montageanleitung Seite 62

Product:
 Helical geared motors
 Shaft mounted geared motors
 Parallel shaft geared motors
Helical worm geared motors

 Helical bevel geared motors
 Angle parallel shaft geared motors
 Worm geared motors
Producer: WATT DRIVE Antriebstechnik GmbH, Wöllersdorfer Straße 68, 2753 Markt Piesting - Austria
Authorized person for the compilation of the technical documents:
Norbert Reisner - Wöllersdorfer Straße 68 - 2753 Markt Piesting
The producer herewith declares referring to the above named incomplete machines that:
 They meet the basic requirements of the Direction 2006/42/EC as far as possible.
 The technical documents have been compiled according to Annex VII Chapter B.
 The special technical documents for partly completed machinery have been created and can be made available
to the national authorities in response to a reasonable request.
Their commissioning is prohibited until they have been implemented according to the mounting instruction and

an EC Declaration of Conformity for the whole machine according to Direction 2006/42/EC is submitted.
Relevant applicable provisions:
 EC Machinery Direction
 Security for Machinery
 Electric Equipment
 Separating Safety Equipment
 Safety Distances
 Rotating Electrical Machines
EN 60034-1:2010 + AC:2010, EN 60034-2-1:2007, EN 60034-5:2001 + A1:2007,
EN 60034-6:1993, EN 60034-7:1993 + A1:2001, EN 60034-8:2007 + A1:2014,
EN 60034-9:2005 + A1:2007, EN 60034-11:2004, EN 60034-12:2002 + A1:2007,
EN 60034-14:2004 + A1:2007, EN 60034-30:2009
The original version of the mounting instruction belonging to the incomplete machine is in German.
Markt Piesting, 26.04.2017
Place and Date of issue
Watt Drive Antriebstechnik GmbH · Wöllersdorfer Str. 68 · 2753 Markt Piesting · Austria · Phone: +43(0)2633 404-0 · Mail: info-at@weg.net · Web: www.wattdrive.com
Montageanleitung für MAS
Mounting Instruction for MAS
Declaration of Incorporation
in terms of the EC Machinery Directive 2006/42/EC, Annex II B
Classification:
2006/42/EC
EN ISO 12100:2010
EN 60204 -1:2006 + A1:2009 + AC:2010
EN ISO 14120:2015
EN ISO 13857:2008
®
- Getriebe und Getriebemotoren
®
- Gear units and geared motors
H.
A.
F.
S.
K.
C.
W.
Klaus Sirrenberg – Geschäftsführer
62