Removing Part Of The Weight From The Kitchen Scale; Automatic Or Manual Switch-Off; Volume Units Display Mode - Silvercrest Z29852A Bedienungs- Und Sicherheitshinweise

Note for zero or tare setting:
a) If the total weight of all the
substances already placed on
the kitchen scale including the
weighing bowl is less than
200 g, then the LC display
shows the "0" icon
4
the bottom left corner. This
means that the kitchen scale
has been reset to zero = the
remaining weight capacity of
the kitchen scale remains
between 5000 and 5200 g.
b) If the total weight of all the
substances already placed
on the kitchen scale including
the weighing bowl is more
than 200 g, then the LC dis-
play will show the "T"
4
icon instead in the top
26
left corner. This means that the kitchen scale is
in tare mode = the remaining weight capacity
of the kitchen scale is 5000 g minus the weight
of substances already placed on the kitchen
scale.
Removing part of the weight
Q
from the kitchen scale
Place the weighing bowl
j
platform .
6
Note: The container bowl must not exceed
200 g.
j Press the On / Off / Zero button
on the kitchen scale
j Wait until the LC display
on 0 g , 0:0.0 lb:oz
17
0.0 fl'oz , which will be the mode the kitchen
19
scale was in when it was last switched off.
j Press the mode button
mode (preset to g or lb:oz).
23
j Place the substance to be weighed into the
weighing bowl
1
The LC display
4
substance placed in the weighing bowl.
j Press the On / Off / Zero button
LC display to zero.
4
79419 CB4 IM.indd 9
in
24
on the weighing
1
to switch
5
.
2
stops and stabilizes
4
or 0 ml or
20 18
to set the weighing
3
to start the weighing process.
shows the weight of the first
to reset the
5
Now remove the desired amount of substance
j
from weighing bowl
1
shows the weight of the substance removed
from the weighing bowl as a negative value.
Automatic or manual switch-
Q
off
j The kitchen scale switches itself off automatically
if it has not been used for 2 minutes.
j Press the On / Off / Zero button
than 3 seconds to switch off the kitchen scale.

Volume units display mode

Q
j Place the kitchen scale on
a solid, flat surface.
Press the On / Off / Zero
j
button to switch on the
5
kitchen scale .
2
j Wait until the LC display
stops and stabilizes on
4
0 g , 0:0.0 lb:oz
17 20
0 ml or 0.0 fl'oz
18 19
which will be the mode the
kitchen scale was in when
it was last switched off.
j Press the mode button
until milk or water
22 21
appears as the volume
mode with the units as ml
or fl'oz.
j Place a container for liquid
or the weighing bowl
1
on the weighing platform
j Press the On / Off / Zero button
LC display to zero (0 ml or 0.0 fl'oz). Pour
4
milk or water (as selected previously) into the
container.
j The LC display now automatically shows
4
the volume of liquid poured into the container,
either in ml or in fl'oz, depending on the setting.
Then press the mode button
j
scale to weighing mode again and read off the
equivalent weight of the liquid.
Getting started
. The LC display
4
for longer
5
or
,
3
.
6
to set the
5
to set the kitchen
3
GB 9
12/31/2012 12:53:29 PM