Before Use; Inserting / Replacing The Batteries; Clock Mode / Setting - Silvercrest IAN 285527 Bedienungs- Und Sicherheitshinweise

Before use

Note: Remove all packaging materials from the product.

Inserting / replacing the batteries

(Fig. B)
1. Turn the product over and place them on a soft underlay
to avoid scratching the surface.
2. Remove the battery compartment cover
3. Remove the battery separation strip by pulling it out.
4. Reinstall the batteries if necessary and then close then
battery compartment
use.
Note: Make sure you insert the batteries with the correct polar-
ity. This is indicated inside the battery compartment
The product is now in the clock mode, and ready for use.

Clock mode / setting

The clock must be adjusted before using for the first time and
after the batteries have been changed.
As soon as the batteries have been inserted, the hour field
on the LC Display
the ▲ ZERO / TARE button
Press the T-SET button
Press the ▲ ZERO / TARE button
to set the minutes.
Press the T-SET button
. The product is now ready for
9
begins to blink. To set the hour press
5
or the ▼ UNIT button
7
, to switch to the minute field.
4
. The clock is now set.
4
.
8
or ▼ UNIT button
7
.
9
.
6
6
GB 13