Stand-Alone Mode - EuroLite LED KLS Scan Next FX Bedienungsanleitung

Stand-alone mode

Automatic mode
In automatic mode, 20 different show programs are available that run at an adjustable speed.
1 Call operating mode AUTO (automatic mode) in the menu.
2 For program selection navigate to menu item Program using the UP and DOWN buttons and confirm
with ENTER. Use UP and DOWN to select the number of the desired program. Confirm with ENTER.
3 For color fading navigate to menu item Fade using the UP and DOWN buttons and confirm with ENTER.
Use UP and DOWN to select the ON setting. Confirm with ENTER.
4 To adjust the running speed of the program navigate to menu item Speed using the UP and DOWN
buttons and confirm with ENTER. Use UP and DOWN to adjust the running speed from 1 (slow) to 99
(fast). Confirm with ENTER.
5 To adjust the brightness navigate to menu item Dimmer using the UP and DOWN buttons and confirm
with ENTER. Use UP and DOWN to adjust the brightness of the program from 0 (dark) to 255 (bright).
Confirm with ENTER.
Sound control
Via the integrated microphone the unit can perfectly reproduce the 20 show programs to the rhythm of the
music (sufficient bass provided).
1 Call operating mode SOUND (sound control) in the menu.
2 For program selection navigate to menu item Program using the UP and DOWN buttons and confirm
with ENTER. Use UP and DOWN to select the number of the desired program. Confirm with ENTER.
3 For color fading navigate to menu item Fade using the UP and DOWN buttons and confirm with ENTER.
Use UP and DOWN to select the ON setting. Confirm with ENTER.
4 To adjust the brightness navigate to menu item Dimmer using the UP and DOWN buttons and confirm
with ENTER. Use UP and DOWN to adjust the brightness of the program from 0 (dark) to 255 (bright).
Confirm with ENTER.
5 Use the rotary control SENSITIVITY to adjust the microphone sensitivity to the sound volume. In case of
a missing sound signal, the LEDs are either switched off after 5 seconds or hold the most recent light
effect. This function can be found under the menu item Setup > SOUND.
Manual mode
The Manual mode allows each of the lighting effects to be individually adjusted.
1 Call operating mode Manual in the menu.
2 Navigate to the desired lighting effect unit: Par 1 to Par 4, Derby, or Pan to Shutter for the scanners.
3 In the Par 1 to 4 menu items, you can set the brightness of the basic colors red, green, blue and white
for the LED spots.
4 In the Derby menu items, you can also set the brightness of the basic colors and the rotation speed of
the motor.
5 In the Pan and Tilt menu items, you set the pan and tilt angles of the scanner mirrors. Under Color you
select the color and under Gobo the pattern. In the Dimmer menu item you can define the brightness of
the scanners and in the last menu item Shutter the strobe effect.
39/56
00132156, Version 1.0