Stand-Alone Mode - EuroLite LED PLL-2000 Bedienungsanleitung

Curve
Mode
PWM rate
Correcting

Stand-alone mode

The respective mode can be exited via the "Quit" menu item.
CCT
ColorTemp
In Color Temp mode, you can set the color temperature.
Press the encoder and then turn the encoder to the right until the Color Temp function is indicated in the
display. Confirm by pressing the encoder. Now you can set the desired color temperature from
1800K – 10000K by turning the encoder. Confirm by pressing the encoder.
Intensity
In Intensity mode, you can set the total brightness.
Press the encoder and then turn the encoder to the right until the Intensity function is indicated in the
display. Confirm by pressing the encoder. Now you can set the desired brightness from 000 – 255 by turning
the encoder. Confirm by pressing the encoder.
Strobe
In Strobe mode, you can set the speed for strobe.
Press the encoder and then turn the encoder to the right until the Strobe function is indicated in the display.
Confirm by pressing the encoder. Now you can set the desired speed from 000 – 012. Confirm by pressing
the encoder.
HSI
Hue
In Hue mode, you can set the desired color.
Press the encoder and then turn the encoder to the right until the Hue function is indicated in the display.
Confirm by pressing the encoder. Now you can set the desired color from 000 – 255. Confirm by pressing
the encoder.
Saturation
In Saturation mode, the saturation of the color can be set. Press the encoder and then turn the encoder to
the right until the Saturation function is indicated in the display. Confirm by pressing the encoder. Now you
can set the desired saturation from 000 – 255. Confirm by pressing the encoder.
Effect.Fireworks
Bright Setting the total brightness 000 – 255
Setting the dimmer curves
Dimmer curve: Linear;
Curve Dimmer curve: Exponential;
Dimmer curve: Logarythmic;
Dimmer curve: S-type
5CH Setting the 5-channel mode
8CH Setting the 8-channel mode
9CH Setting the 9-channel mode
11CH Setting the 11-channel mode
Pulse-width modulation
With this function the PWM frequency of the LEDs can
PWMrate
be set: 800Hz, 1200Hz, 2000Hz, 3600Hz, 12000Hz,
15000Hz, 25000Hz
ON Color correction on
OFF Color correction off
27/36 00146057, Version 1.1