Installation Guide; Hardware Installation; Connect Activy Media Server 150 To Your Local Area Network (Lan); Power On The Activy Media Server 150 - Fujitsu SIEMENS ACTIVY 150 Benutzerhandbuch

2 Installation Guide

2.1 Hardware Installation

2.1.1 Connect ACTIVY Media Server 150 to your Local Area Network
(LAN)
1. Connect one end of a RJ-45 cable to the LAN port on the device.
2. Connect the other end of the cable to your IP sharing router or switch or to
your PC or Notebook computer.

2.1.2 Power on the ACTIVY Media Server 150

1. Connect the included power cord with the power adapter
2. Connect the power plug to a power outlet.
3. Push the power button to power the ACTIVY Media Server 150 on.

2.1.3 Power off the ACTIVY Media Server 150

1. Press the button for two seconds until Power LED starts to blink.
2. It is essential that the device be switched off using the power button prior to
removing the power connection. Otherwise data may be lost.

2.1.4 Connect external USB devices to the ACTIVY Media Server 150

The device features two USB ports that allow users to connect external USB
storage devices, like USB flash drives (Memorysticks) and external USB harddrives.
Find the USB cable that came with your USB storage device. Insert the USB Type A
end of the cable to the ACTIVY Media Server 150, the other end to your USB
storage.
Note: a) The Type A end of the USB cable is the
end that usually connects to your
computer.
b) If you are connecting an external HD to
the USB ports on the device, we highly
recommend users to use the power
adapter of the external HD to supply sufficient power for your
external HD.
2.1.5 Connect an external eSATA drive to the ACTIVY Media Server
150
The device equips one eSATA port that allows users to connect an eSATA device.
Please find the cable that came with your eSATA device. Connect your device to
the "eSATA" port on front panel.
ACTIVY Media Server 150
7