Web Server; Administration Web; Web Server Configuration - Fujitsu SIEMENS ACTIVY 150 Benutzerhandbuch

3.9 Web Server

3.9.1 Administration WEB

The Administration port is the port for accessing the Web-based management
interface (GUI).
To modify the Administration Port, enter a port number from 1 to 65535 then click
Apply to save your configuration.
Note: The Port 80 is configured as the default Administration WEB server port. If
you have changed this port number, you need to enter this port number in
your web browser in order to access the GUI again. For example, if you
have changed the port to 88, please enter

3.9.2 Web Server Configuration

The device embeds a WEB server that allows users to deliver a Website to their
network.
To activate the WEB server,
1. Click "Yes" to enable.
2. Specify a port number from 1~65535. The default is 8080.
3. Specify a "WEB Folder" where you place your HTML files.
Note: 1. The WEB server supports HTML format only.
2. As default, the Port 80 can't be setup as the Web Server Port
since port "80" has been configured as the administration port.
3. The start page of your web content must have the file name
index.html
4. To access your content, enter
configured a different port number, enter this number after the
colon)
5. For information how to create and maintain a web site please
refer to the vast offerings of literature and tools available in the
market
ACTIVY Media Server 150
http://ams150:88
http://ams150:8080
41
.
(if you have