Menu Items List; Status - Fujitsu SIEMENS ACTIVY 150 Benutzerhandbuch

3.2.2 Menu items list

The following table lists the information and items that you can configure with the
GUI. For detail instruction, please refer to the following chapter.
Category Sub-category Information

Status

Status
Disk Folder
Disk
Network Host
IP address
System Administrator To change the administrator name and password.
Time
User
Group
Option FTP
Security IP
Security MAC To configure the allowed or denied MAC addresses for
File Download To add, delete download tasks or change download task
Maintenance Maintenance
Web Server Web Server
AV Server AV Server
USB/eSATA Detail
Disk Setup
Shows the status information of this device including Host
name, IP address, HD used percentage, system up-time,
firmware version, current Samba users and FTP users,
information on firmware extensions and if there is an eSAT
device connected.
Allows to add a new folder, delete a folder, change
folder-access permissions and to set folder properties.
Allows to format the internal hard disk
To change the device's host name, Work group name
and description.
To configure the network settings for the device including
DHCP enable/ disable, IP address, Subnet Mask,
Gateway, DNS servers, and Jumbo mode selecting.
To set up the system time zone, synchronize time and
assign a timeserver for the device.
To add a new user, delete a user, setup user
permissions and change user properties.
Organize users in groups. Add users to groups or delete
users from groups.
Change FTP properties including enable/disable FTP
Server, Port number, Timeout setting and enable/disable
anonymous access.
To configure the allowed or denied IP addresses for
getting access to the device.
getting access to the device.
properties.
Provides device maintenance including backup the
status of your configuration to the device, select code
page, firmware upgrade, system restart, reset to factory
default, language selection, sleep mode settings, system
shut down, load of firmware extensions
To change the Web server properties.
To enable and configure the audio/video server (A/V
server) function.
Shows information of a connected USB device. (a
connected eSATA device is not displayed here – see the
Status page)
To setup, remove or format a USB or eSATA device that
is connected to the ACTIVY Media Server 150.
14
ACTIVY Media Server 150