Management Guide; Starting The Graphic User Interface (Gui) - Fujitsu SIEMENS ACTIVY 150 Benutzerhandbuch

3 Management Guide

Read this chapter to understand the management interface of the device and how
to manage the device.

3.1 Starting the Graphic User Interface (GUI)

The Graphic User Interface (GUI) is the management interface of this device. Most
parameters and settings are configured over the GUI.
1. To get access to the GUI, open your web browser, enter http://ams150 and
press Enter.
Note: In case you have connected the ACTIVY Media Server 150 to a PC or
Notebook computer directly or if there is no DHCP server in your
network, you can also enter http://169.254.0.1. Please make sure your
PC has also an address in the range 169.254.xxx.xxx – see the
Troubleshooting section of this manual if you experience difficulties
during access
If your Microsoft
installed, the ACTIVY Media Server 150 will appear under "My Network
Places" immediately. You can double click the AMS150 icon to access the
GUI. To enable the UPnP user interface under Microsoft
the Control Panel, Add or remove programs, Add/remove Windows
components, select "Networking services" and click "Details". Check "UPnP
user interface" and press OK.
® ®
Windows XP computer has the "UPNP user interface"
ACTIVY Media Server 150
11
® ®
Windows XP, enter