Before Commissioning - Scheppach TRW1200 Original Bedienungsanleitung

m ATTENTION!
This power tool generates an electromag-
netic field during operation. This field can
impair active or passive medical implants
under certain conditions. In order to prevent
the risk of serious or deadly injuries, we rec-
ommend that persons with medical implants
consult with their physician and the manu-
facturer of the medical implant prior to oper-
ating the machine.
Mixer safety instructions
a) Always hold the power tool with both
hands on the intended handles. Loss
of control can cause personal injury.
b) Ensure sufficient ventilation when
mixing flammable materials to avoid
a hazardous atmosphere. Developing
vapour may be inhaled or be ignited by
the sparks the power tool produces.
c) Do not mix food. Power tools and their
accessories are not designed for pro-
cessing food.
d) Keep the cord away from the working
area. The cord may be entangled by the
stirrer.
e) Ensure that the mixing container is
placed in a firm and secure position.
A container that is not properly secured
may move unexpectedly.
f) Ensure that no liquid splashes against
the housing of the power tool. Liquid
that has penetrated the power tool can
cause damage and lead to electric shock.
g) Follow the instructions and warnings
for the material to be mixed. Material to
be mixed may be harmful.
h) If the power tool falls into the mate-
rial to be mixed, unplug the power tool
immediately and have the power tool
checked by a qualified repair person.
Reaching into the mixing container with
the power tool still plugged in can lead to
electric shock.
i) Do not reach into the mixing contain-
er with your hands or insert any other
objects into it while mixing. Contact
with the stirrer may lead to serious per-
sonal injury.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
j) Start up and run down the power tool
in the mixing container only. The stir-
rer may bend or spin in an uncontrolled
manner.
Residual risks
m The machine has been built according
to the state-of-the-art and the recognised
technical safety requirements. However, in-
dividual residual risks can arise during op-
eration.
• Danger of injury for fingers and hands due
to the rotating mixing paddle.
• Hazard due to electrical power with the
use of improper electrical connection ca-
bles.
• Furthermore, despite all precautions hav-
ing been met, some non-obvious residual
risks may still remain.
• Residual risks can be minimised if the
„Safety instructions" and „Intended use"
are observed along with the complete op-
erating instructions.

6. Before commissioning

• Open the packaging and carefully remove
the device.
• Remove the packaging material, as well
as the packaging and transport safety de-
vices (if present).
• Check that the delivery is complete.
• Check the device and accessory parts for
transport damage.
• If possible, keep the packaging until the
end of the warranty period.
ATTENTION!
The device and the packaging are not chil-
dren's toys! Do not let children play with
plastic bags, films or small parts! There is a
danger of choking or suffocating!
Before connecting the machine to the mains
power, make certain that the data on the
type plate matches with the mains power
data.
GB | 21