ATH-Heinl Cross Lift 50+ Bedienungsanleitung Seite 96

4. Pneumatic connection
a. Install the pneumatic hose(s) as shown below.
P1 = Secondary scissors main lift
A-2 = Secondary cylinder wheel-free lift
AV2 = Release for main lift
You will find the associated circuit diagram in Appendix 6.1 of these operating instructions.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
P2 = Main scissors main lift
AV1 = Release for wheel-free lift
AV3 = Lowering acceleration valve
Manufacturer ATH-Heinl GmbH & CO.KG
- 30 -