Technical Description - ATH-Heinl Cross Lift 50+ Bedienungsanleitung

The ATH Heinl axle play tester was developed for testing the
chassis suspension and steering elements of passenger cars and light commercial vehicles. Operation is via
a wired remote control with integrated test lamp.

Technical description:

Mechanical system: The test unit consists of two test plates. The transverse movement is 80 mm in both
directions and 50 mm in the longitudinal direction both forwards and
backwards. The longitudinal movement can also be performed simultaneously by
both plates. Both plates are designed as bulb plates for improved adhesion.
Safety
All axle play testers are developed and manufactured in accordance with current safety requirements.
Safety has been further increased by also covering the plate edges and corners.
Control unit and test lamp: The control unit and hydraulic components
have been integrated into a single unit and can be installed on the lift unit. This unit contains all
components required for operation. The remote control with test lamp is connected to this central unit via
a cable.
Standard delivery contents:
- 2 test plates
- Central unit and hydraulics unit
- Remote control with test lamp
- The hydraulic hoses are already installed and connected to the platform.
Certifications / standards
- CE
- Fulfils the requirements of the Austrian Ordinance on Testing Laboratories -
3rd PBStV-Nov. of July 2008 – Annex 2a / Point 9
(and thus also the less stringent requirements of the 5th PBStV-Nov. of December 2010)
Technical data:
- Actuation: Hydraulic
- Hydraulic oil quantity: approx. 8 litres
- Corrosion protection: Galvanised
- Maximum axle load: 2.6 t
- Maximum actuating force per plate: 8 kN
- Speed of movement: 50 mm/sec.
- Movements:
- Transverse movement: 80 mm per plate, inverse
- Longitudinal movement: 50 mm per plate, inverse and parallel
- Power supply: 3 x 400 V / PE 50 Hz –  Fuse protection: 16 A
- Overall dimensions (2 separate units): 600 x 500 x 56 mm
- Test plate dimensions: 270 x 500 mm
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 9 -