Auriol Z29962A Bedienungs- Und Sicherheitshinweise Seite 78

is indicated inside the battery compartment
(see Fig. C).
j
Close the battery compartment cover.
As soon as the batteries have been inserted, the LCD
indicates the indoor temperature
. The weather station starts to receive the signal
3
from the external sensor. When it has successfully
received the external sensor signal, the outdoor
temperature
1 minute.
note: do not alter the position of the weather station
when it is picking up the signal, as this can interfere
with reception.
The weather station starts to pick up the radio signal
after it has successfully received the external sensor
signal. This process can take up to 7 minutes and is
indicated on the LCD by the flashing
Once the DCF radio signal has been picked up
successfully, the
on the LCD.
If synchronisation with the atomic clock is not possible
during setup, change the position of the weather
station (e.g. to next to a window).
j
If the weather station does not work properly, you
can restart it by pressing the ADJUST button
Reception may be seriously restricted by certain
obstacles (e.g. concrete walls) or sources of inter-
ference (e.g. other electrical devices).
If interference with reception of the radio signal con-
78 GB/MT
appears on the LCD after around
7
icon
15
and the humidity
5
icon
is displayed constantly
21
.
15
.
12