Temperature Restrictor (Overheat Protector); Using The Thermostat And Adjusting The Temperature; Timer Functions - Sentiotec IKI Monolith Montage- Und Gebrauchsanweisung

Installation instructions, only for experts

7. Temperature restrictor (overheat protector)

The temperature restrictor switches off the power if the temperature in the sau-
naroom climbs dangerously high. If the restrictor goes off, the cause is not a
temporary malfunction. In this case consult the manufacturers technical support.
See the more detailed instructions provided by the control unit's
manufacturer.
8. Using the thermostat and adjusting the tempe-
rature
In various control unit models the selected bathing temperature is shown on the
screen of the control panel. The thermostat sensor must not be installed less
than 1000 mm from an undirected incoming air valve or less than 500 mm away
from an incoming air valve which has been directed away from the control unit.
See the more detailed instructions provided by the control unit's
manufacturer.

9. Timer functions

Various control unit models have many various timer options. Attn. more than
4 hr operational time is prohibited in private use and should be consulted by
qualified electrician.
See the more detailed instructions provided by the control unit's
manufacturer and local laws.
WORLD OF WELLNESS
p. 11/22
EN