Troubleshooting - Renkforce RCD-3038KL Bedienungsanleitung

Troubleshooting

The Renkforce RCD-3038KL CD tuner you have purchased is equipped with state-of-the-art technology and is safe
to operate.
Nevertheless, problems or errors may occur.
Therefore, we would like to describe how to eliminate possible faults here:
Please observe the safety notes!
No replay, no display, and the lights are out:
• The vehicle fuse is defective. Look up the respective fuse in the operation manual of your car. Check the fuse.
• The fuse of the CD tuner is defective. Remove the CD tuner and check the fuse.
• The positive line/earth line is loose. Remove the CD tuner and check the connections of the cables.
Replay only through one speaker:
• The balance control is wrongly adjusted. Adjust the balance control as described.
• The speaker connection has come loose. Remove the CD tuner and/or speakers and check the connections.
Replay only through the front or rear speakers:
• The fader control is not adjusted correctly. Adjust the fader control.
• The speaker connection has come loose. Remove the CD tuner and/or speakers and check the connections.
In radio operation hardly any stations can be received:
• The aerial is not pulled out completely. Pull out the aerial to its full length.
• The aerial connection has come loose. Remove the CD tuner and check the connection.
• The aerial is defective. Check the connection, earthing and the aerial itself.
71