Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mechanical Installation
•
Remove the front control unit (step 1).
•
Carefully remove the plastic frame in the front of the system, by bending it slightly to the outside and pulling it off
from the unit (step 2).
•
Unlock the installation frame with the two unlocking keys (step 3).
•
Remove the installation frame towards the back of the system (step 4).
•
Insert the frame into the respective cut-out in the vehicle (step 5).
•
Bend down some clips in the installation frame until the frame is securely fastened in the recess (step 6).
47
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
