Button Functions - Renkforce RCD-3038KL Bedienungsanleitung

Operation

Button functions

• BND/LOUD/ENT button (6)
With this button you can select the band range of the radio unit. There are 3 FM and an AM range:
F1 > F2 > F3 > MW

On each of the four band ranges, 6 stations can be stored on the station button 1-6 (24).
•  (15) and  (5) buttons
With these buttons the receiving frequency can be changed to adjust stations in radio operation.
Briefly pressing a button starts the automatic station search (display shows SEARCH).
The auto-scan only stops at the next station that can be received well.
By pressing a button longer, you activate manual station scan.
The display shows MANUAL.
In this mode, the frequency is changed until you release the corresponding button again. Brief presses of this button
changes the frequency step by step.

If buttons are not pressed for a longer period of time, the devices switches back to automatic station
search. The display shows AUTO.
• Station buttons 1-6 (24)
If you briefly press these buttons, you can select a station you have pre-set.
If you want to store a station you are listening to, simply press the desired button for more than 1 second.

Every one of the three FM ranges (FM1-3) and the AM reception range (MW1 and MW2) has six station
buttons. Therefore you can assign 30 station buttons.
61