Renkforce RCD-3038KL Bedienungsanleitung Seite 55

Operation
• DSP (12) button
With this button various information can be displayed on the LC display (7). Press the button once more to move to
the next display.
When the button is not activated anymore, the display returns to the original information after a little while.
When an RDS station is being received
Radio operation:
CD-/MP3 operation:
When no RDS station is being received
Radio operation:
CD-/MP3 operation:
Setting the time
Push the button DSP (12) briefly until the time is displayed.
Then hold the button DSP (12) pushed until the time display flashes.
Use the button  (5) to set the minutes and the button  (15) to set the hours.
• RESET button
This button is behind the front cover next to the contacts for the operating unit and resets all the settings to the original
settings that were made in the factory.
Press this button in the following cases with a pointy object:
- when you have completed the installation and connection
- when the CD tuner does not react to the operation of buttons anymore
- when the display shows undefined characters
Time > Station name > Program type > Transmission frequency
Time > ID3-Tag-Infos > Track display
Time > Transmission frequency
Time > ID3-Tag-Infos > Track display
55