Renkforce RCD-3038KL Bedienungsanleitung Seite 57

Operation
DIM HIGH/LOW/MID
Setting the display brightness
HIGH: highest brightness
LOW: lowest brightness
MID: medium brightness
TA SEEK/ALARM
TA SEEK: When the radio has lost the traffic information, it will seek a new station with Traffic Announcement
coding.
TA ALARM: When the radio cannot receive the TA code anymore, there will be an alarm signal. If the set station
does not send any RDS information, the display shows SEEK PI.
PI SOUND/MUTE
Device reaction when a transmission area is reached where 2 different stations with different programme
identification (PI) are transmitting the same AF (alternative frequency).
PI SOUND: The radio switches to the new station briefly and then back.
PI MUTE: The new station is muted.
RETUNE S/L
RETUNE S: When the radio does not receive traffic announcements or programme information anymore for
30 seconds, the auto-scan starts.
RETUNE L: When the radio does not receive traffic announcements or programme information anymore for
90 seconds, the auto-scan starts.
MASK DPI/ALL
Device reaction during station search.
MASK DPI: Alternative frequencies with different programme information (PI) are not considered.
MASK ALL: Alternative frequencies with different programme information (PI) and alternative frequencies with a
high signal strength but without RDS information are not considered.
57