Pioneer PDP-42RXE Benutzerhandbuch Seite 7

1 Important User Guidance Information
mportant User Guidance Information
Panel sticking and after-image lag
• Displaying the same images such as still images for a long
time may cause after-image lagging. This may occur in the
following two cases.
order to obtain maximum enjoyment from this Pioneer
eVision PDP-42RXE Plasma Display System, please first
1. After-image lagging due to remaining electric
d this information carefully.
load
h the Pioneer PureVision PDP-42RXE, you can be assured of
When image patterns with very high peak luminance are
igh quality Plasma Display System with long-life and high
displayed more than 1 minute, after-image lagging may occur
ability. To achieve images of exceptional quality, this Pioneer
due to the remaining electric load. The after-images remaining
sma Display System incorporates state-of-the-art design and
on the screen will disappear when moving images are dis-
nstruction, as well as very precise and highly advanced
played. The time for the after-images to disappear depends on
hnology.
the luminance of the still images and the time they had been
er the course of its lifetime, the luminosity of the Pioneer
displayed.
P-42RXE Plasma Display System will diminish very slowly,
h as with all phosphor-based screens (for example, a
2. After-image (lag image) due to burning
ditional tube-type television). To enjoy beautiful and bright
ages on your Pioneer Plasma Display System for many years Avoid displaying the same image on the Plasma Display
come, please carefully read and follow the usage guidelines
continuously over a long period of time. If the same image is
ow.
displayed continuously for several hours, or for shorter periods
of time over several days, a permanent after-image may remain
on the screen due to burning of the fluorescent materials. Such
age guidelines
images may become less noticeable if moving images are later
phosphor-based screens (including conventional tube-type
displayed, but they will not disappear completely.
visions) can be affected by displaying static images for a
• The Auto Power Off function can be set to help prevent
longed period. Plasma Display Systems are no exception to
damage from screen burning (see page 34).
s rule. After-image and permanent effects on the screen can
avoided by taking some basic precautions. By following the
ommendations listed below, you can ensure longer and
sfactory results from your plasma:
Whenever possible, avoid frequently displaying the same
mage or virtually still moving pictures (e.g. closed-captioned
mages or video game images which have static portions).
Do not display Teletext for a prolonged period of time.
Avoid viewing the On Screen Display for extended periods,
rom a DVD player, VCR, and all other components.
Do not leave the same picture freeze-framed or paused
ontinuously over a long period of time, when using the still
icture mode from a TV, VCR, DVD player or any other
omponent.
mages which have both very bright areas and very dark
reas side by side should not be displayed for a prolonged
eriod of time.
When playing a game, the "Game" mode setting within "AV
election" is strongly recommended. However, please limit its
se to less than 2 hours at a time.
After playing a game, or any still image, it is best to view a
ormal moving picture in the "Wide" or "Full" screen setting
or over 3 times longer than the previous still/moving image.
After using the Plasma Display System, always switch the
isplay to "STANDBY" mode.
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for
used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of
charge to designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus
prevent potential negative effects on the environment and human health.
Downloaded From TV-Manual.com Manuals
Installation guidelines
The Pioneer PureVision PDP-42RXE Plasma Display System
incorporates a very thin design. To ensure safety, please take
the proper measures to mount or install the Plasma Display, in
order to prevent the unit from tipping over in the event of
vibration or accidental movement.
This product should be installed by using only parts and
accessories designed by PIONEER. Use of accessories other
than the PIONEER installation bracket may result in instability,
and could cause injury. For custom installation, please consult
the dealer where the unit was purchased. To ensure correct
installation, experienced and qualified experts must install the
unit. PIONEER will not be held responsible for accident or
damage caused by the use of parts and accessories manufac-
tured by other companies.
To avoid malfunction and overheating when installing, make
sure that the vents on the main unit are not blocked. To ensure
proper heat emission:
• Distance the unit slightly from other equipment, walls, etc.
For the minimum space required around the unit, see page
14.
• Do not fit the unit inside narrow spaces where ventilation is
poor.
• Do not cover with a cloth, etc.
• Clean the vents on the sides and rear of the unit to remove
dust build-up by using a vacuum cleaner set to its lowest
suction setting.
• Do not place the product on a carpet or blanket.
• Do not leave the product tilted over.
• Do not reverse the product.
Using the unit without proper ventilation may cause the
internal temperature to rise, and could result in possible
malfunction. When the surrounding or internal temperature
exceeds a certain degree, the display will automatically power
off in order to cool the internal electronics and prevent a
hazardous occurrence.
Malfunction can be caused by many factors: inappropriate
installation site, improper assembly/installation/mounting,
improper operation of or modifications made to this product.
However, PIONEER cannot be held responsible for accidents or
malfunction caused by the above.
The following are typical effects and characteristics of a
phosphor-based matrix display and as such, are not covered by
the manufacturer's limited warranties:
• Permanent residual images upon the phosphors of the panel.
• The existence of a minute number of inactive light cells.
• Panel generated sounds, examples: Fan motor noise, and
electrical circuit humming / glass panel buzzing.
01
En