Changing The Volume And Sound; Displaying Information - Pioneer PDP-42RXE Benutzerhandbuch

erations
Using the multiscreen functions
You can display a sub-picture within the main picture. In this
way you can watch a TV programme or monitor the video input
from any connected device while watching TV or another video
input.
nging the volume and sound
Use this function following the procedures below to select the
rations
crease the volume, press the
Twin (2-screen) or PIP (picture in picture) mode.
rol unit. To decrease the volume, press the
e VOLUME +/– buttons on the Plasma Display operate in
+/– buttons on the remote control
e same way as the
• In the multiscreen function, the sound of a main input is always
power on and off (Standby)
it.
output.
mute the sound output, press the
WER button on the bottom of the Plasma
PIP (picture in picture)
r the standby mode.
the screen. To quit muting, press the
BY indicator lights up.
+/– button also quits muting.
essing the
any button from 0 to 9 on the remote
STANDBY/ ON button on the bottom of
sma Display
play.
(bottom view)
Display switches to on. The STANDBY
hts off and the current input source
hts up.
lasma Display off, press the
trol or the STANDBY/ ON button on the
Plasma Display for 1 second.
Twin 1 (2-screen)
Display enters to standby mode and the
dicator lights up instead of the current
indicator.
VOLUME –/+ buttons
lasma Display off completely, press the
n on the bottom of the Plasma Display.
BY indicator lights off.
to use the Plasma Display for a long period of
P
WER button on the bottom of the Plasma Display
ma Display off completely and disconnect the
Main input
lasma Display from a wall outlet.
Twin 2 (2-screen)
ay is switched off completely, you cannot turn the
by pressing the button on the remote control.
Volume adjustment
ay is switched off completely, it cannot switch the
automatically by the "On Timer" setting.
Volume
Muting
Main input
1
Press the MENU button.
2
Press the c or d button to move to Screen, then press
the \ or OK button.
3
Press the c or d button to move to PIP/TWIN, then
press the \ or OK button.
Screen
Screen Size
Main Input
PIP/TWIN
AV1 Input
AV2 Output
Screen Saver
Move
Downloaded From TV-Manual.com Manuals
En
+ button on the remote
– button.
button. " " appears
button again.
button on
Main input Sub-picture
Sub-picture
4
Sub-picture
Full
ANALOG CH
VIDEO
ANALOG CH
Enter Return
4
Select PIP/TWIN Mode and press the \ or OK button
again.
5
Press the c or d button to select the required option as
follows, then press the [ or the BACK button.
Off - PIP - TWIN1 - TWIN2
PIP/TWIN

Displaying Information

PIP/TWIN Mode
PIP/TWIN Input
You can display the channel information and the setting status
PIP Position
you selected.
Press the button.
For analogue
Adjust
A T V 3
C 9
• If you set to Off, the following steps are not available.
Mono
6
Press the c or d button to move to PIP/TWIN Input,
then press the \ or OK button.
7
Press the c or d button to select the required input
source as follows, then press [ or the BACK button.
8 : 30 a m
ANALOG CH - AV1 - AV2 - AV3 - S-VIDEO - VIDEO -
POWER
button
COMPONENT - HDMI
For SPLIT
PIP/TWIN
PIP/TWIN Mode
A T V 3
PIP/TWIN Input
C 9
PIP Position
Mono
AV1
8 : 30 a m
Move
For external input
STANDBY indicator
• You can select the mode by simply pressing the
AV1
the remote control.
• You can select the source by simply pressing the
the remote control.
• In Twin or PIP mode, press the
of the 2-screen shown.
8 : 30 a m
STANDBY/ON button
Current input source indicator
PIP Off
AV1
PIP
TWIN1
TWIN2
Return
ANALOG CH
PIP AV 1
AV1
AV 2
AV 3
S-VIDEO
VIDEO
COMPONENT
HDMI
Enter Cancel
button to switch the position
button on
button on