Connecting To The Hdmi Input - Pioneer PDP-42RXE Benutzerhandbuch

0 Enjoying through External Equipment

Connecting to the HDMI Input

Enjoying through External Equipment
can connect many types of external equipment to your Plasma Display, like a DVD player, VCR, game console, and camcorder.
o protect all equipment, always turn off the Plasma Display before connecting to a DVD player, VCR, STB, or other external
quipment.
The digital video and audio signals can be input to the HDMI
terminal. To use the HDMI terminal, activate the terminal and
Refer to the relevant instruction manual (STB, VCR, DVD player, etc.) carefully before making connections.
specify the types of video and audio signals to be received from
the connected equipment. For the types of these signals, refer
to the operation manual supplied with the connected equip-
ment.
onnecting to the SCART terminal
Input signal correlation table
1920∗1080i@50Hz
720∗576p@50Hz
1280∗720p@50Hz
1920∗1080i@59.94/60Hz
720∗480p@59.94/60Hz
1280∗720p@59.94/60Hz
AV 1
Connect the SCART cable to the AV (AV1, AV2 or AV3)
terminal on the Plasma Display and to the SCART
terminal on the required equipment.
Turn the Plasma Display on, then press the INPUT
button to select AV1, AV2 or AV3.
Downloaded From TV-Manual.com Manuals
HDMI
HDMI
SCART cable (commercially available)
AV 3
AV 2
HDMI Cable
(commercially available)
Audio Cable
(commercially available)
L
R
AUDIO
1
Connect the HDMI cable to the HDMI jack on the Plasma
Display and to the DVD output jack on the required
equipment.
2
When connecting with DVI jack, such as a DVD player,
connect the audio cable to the AUDIO INPUT-L/R jacks
on the Plasma Display and to the audio output jacks on
the required equipment.
3
Turn the Plasma Display on, then press the INPUT
button to select HDMI.
• PC signals are not supported.
• If no image appears, specify another digital video signal type.
• For the digital video signal types to be specified, refer to the opera-
tion manual supplied with the connected equipment.
• Refer to the operation manual of the required equipment for the
signal type.
• When you connect the equipment to the AV1 terminal, set "AV1
Input". When you connect the equipment to the AV2 terminal,
set "AV2 Output". For details, refer to page 32.
• AV3 terminal is for the monitor output. However, the signal is not
output if you select "COMPONENT" or "HDMI".
HDMI equipment
DVD Player
VCR
DVD Player
Set Top Box or
other audio-
visual equipment
10
En