User Setting; Filter Level; Auto Zero Tracking; Auto Tare - OHAUS Adventurer AX5202 Bedienungsanleitung

ADVENTURER BALANCES
Find Quality Products Online at:
5.3.3

User Setting

Use this sub-menu to change the setting for:
Touch Calibrate
"Runtime calibration, please touch the screen at the center of the ring"
(First top-left, then bottom-right.)
Screen Brightness:
LOW = low screen brightness.
MEDIUM = normal screen brightness.
HIGH = high screen brightness.
Beep:
OFF = disabled
ON = enabled
Auto Dim (Dims the display if no Screen Activity for x minutes)
OFF
= disabled
10 min
20 min
30 min
Level Assist: Instructions on how to move the balance feet to level the balance.
5.3.4

Filter Level

Set the amount of signal filtering.
LOW = faster stabilization time with less stability.
MEDIUM
= normal stabilization time with normal stability.
HIGH = slower stabilization time with more stability.
5.3.5

Auto Zero Tracking

Set the automatic zero tracking functionality.
OFF = disabled.
0.5 D = display maintains zero up to a drift of 0.5 graduation
per second
1 D = display maintains zero up to a drift of 1 graduation
per second.
3 D = display maintains zero up to a drift of 3 graduations
per second.
5.3.6

Auto Tare

Set the automatic Tare.
OFF = disabled.
ON = enabled.
'Place container on the pan' will be displayed when an Automatic Tare is about to
start.
A Deactivate button is displayed underneath the text. Press this button to
deactivate the Automatic Tare function
5.3.7

Graduations

Set the displayed readability of the balance.
1 Division = standard readability.
10 Divisions = readability is increased by a factor of 10.
For example, if the standard readability is 0.01g, selecting 10 Divisions will result in a
displayed reading of 0.1g.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com
EN-33