LaCimbali M100 Serie Gebrauch Und Installation Seite 86

Softener This message is displayed when the softener
resins need to be regenerated. (Follow the
instructions on softener maintenance).
Change water This message is displayed when the machine
lter requires the substitution of the water lter.
In order to eliminate temporary the message, press
the icon
and press the icon
message:
The message will appear again at regular intervals.
Machine in This message is displayed when the machine
stand-by switch ON/OFF has been programmed. The
message indicates that the machine is switch-off
and is in stand-by status.
Energy saving This message is displayed when the machine is
mode in ECONOMY mode.
Messages
about
washings
to access the programming menu:
CHANGE W. FILTER
to cancel out the
38 EN
Once regeneration has been completed, press the
icon to access the programming menu:
REGENERATE RESIN
and press the icon
message:
Note: the need to regenerate the resins is recorded
by the machine.
Contact an authorised technician. The message
will be displayed until the lter has been replaced.
Note: the need to to replace the lter is recorded
by the machine.
Refer to the "Service time menu" chapter to see
how to program the switch ON/OFF of the machine.
Push any dispensing button to turn it on.
Press any dispensing button to exit the ECONOMY
mode and return to the machine work phase.
Please consult this manual at the "Cleaning and
maintenance".
to cancel out the