Filter Holders - LaCimbali M100 Serie Gebrauch Und Installation

CHANGING THE WATER IN THE BOILER - Procedure to carry out at least once a day
1
Press the icon SET

FILTER HOLDERS -

1
In a suitable container that
is neither aluminium or iron,
pour a litre of hot water
(50÷80°C) and a quantity of
detergent according to the
product instructions.
4
Remove any residue with a sponge and rinse well with
running cold water.
2
Press the icon
.
2
Remove the lters from the lter holders.
3
The following message will be
.
displayed: "WATER CHANGE". The
water from the boiler will drain from
the hot-water nozzle (60 - 70% ca. of
the total capacity).
Dispensing will stop automatically.
After the procedure, the machine will
return to its normal functions and the
boiler will be re lled with fresh water.
5
A
Place the lters back in the lter holder, making sure that
the anchoring spring (A) of the lter is in its slot.
35 EN
WATER CHANGE
021%
3
Soak the lters and the lter
holders in this solution for
about 15 minutes.
NOTE! Only immerse the
metal parts.