Using The Tv Macro - Yamaha YSP-800 Bedienungsanleitung

Using the TV macro

The TV macro feature makes it possible to perform a
series of operations with the press of a single button. For
example, when you want to play a DVD, you would
normally turn on the component, select DVD as the input
source and press the play button to start playback. The TV
macro feature lets you perform all of these operations
simply by pressing the DVD macro button.
Notes
• The ways to set macros differ if your TV does not have the
tuning capability.
• If you press any control buttons on the remote control other than
the ones used to set macros while setting macros, the setting
procedure is automatically canceled.
• If it takes more than 10 seconds in steps 2 and 3, the setting
procedure is automatically canceled. In this case, repeat from
step 1.
STANDBY/ON
DVD VCR
INPUT1
AUX
YSP
5BEAM ST+3BEAM
1
STEREO TARGET
4
MUSIC
7
SPORTS
0
CINEMA DSP
CH LEVEL
TEST
VOLUME
MUTE TV INPUT
POWER POWER
AV TV
STB TV
TV
INPUT2 MACRO
INPUTMODE SLEEP
3BEAM
2
3
5 6
MOVIE VOL MODE
8 9
OFF SURROUND
+10
MENU
ENTER
RETURN
CH TV VOL
TV MUTE
CODE SET
■ Setting macros for the TV with the
tuning capability
1
Press and hold CODE SET on the remote
control and then press one of the input
selector buttons to select the input source
you want to set macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE
CODE SET
2
Press MACRO on the remote control while
holding down CODE SET.
TV MUTE
CODE SET
3
Press CH +/– or the numeric buttons to select
the TV channel.
Check that the TV screen changes to the tuner screen.
CH
or
4
Press TV INPUT on the remote control
repeatedly so that the screen changes to the
display of the input source selected in step 1.
TV INPUT
5
Press ENTER on the remote control to
confirm the macro setting.
ENTER
REMOTE CONTROL FEATURES
TV
DVD VCR STB
AUX
MACRO
5BEAM ST+3BEAM 3BEAM
2
1 3
STEREO TARGET
4 5 6
MUSIC MOVIE VOL MODE
7 8 9
SPORTS OFF
0
+10
CINEMA DSP
85