Yamaha YSP-800 Bedienungsanleitung Seite 33

MOUNTING (Mounting)
Use to select the mounted position of the unit in your
listening room.
Choices: SHELF (Shelf mount), WALL (Wall mount)
SHELF
WALL
• Select WALL if the unit is mounted on the wall.
• Select SHELF if the unit is mounted on the shelf.
REFLECTING (Reflecting)
Use to select the reflectivity of your listening room.
Choices: NORMAL (Normal), HI ECHO (High echo)
• Select NORMAL if your listening room has a normal
reflectivity.
• Select HI ECHO if your listening room has highly
reflective surfaces such as concrete walls.
7
Check the following points once again before
starting the AUTO SETUP procedure.
• Is the optimizer microphone firmly connected to
this unit?
• Is the optimizer microphone placed in a proper
location?
• Are there any large obstacles in between the
optimizer microphone and the walls in your
listening room?
8
Press ENTER to start the AUTO SETUP
procedure.
The following screen appears on your TV.
ENVIRONMENT CHECK (Environmental noise
check), SUB WOOFER CHECK (Subwoofer check)
and WILL START in 10 SEC (Will start in 10 sec) are
displayed in order as the PREPARATION procedure
is in progress.
ENTER
PREPARATION
. ENVIRONMENT CHECK
;;;[OK]
SUB WOOFER CHECK
;;;[NOT IN USE]
WILL START in 10 SEC
Move aside or behind YSP
*****-----
If you selected BEAM
OPT+SOUND OPTIMZ or
SOUND OPTIMZ only in
step 5.
AUTO BEAM OPTIMIZATION
AUTO BEAM MEASUREMENT/SET
Skipped if you selected
SOUND OPTIMZ only in
step 5.
ACOUSTIC OPTIMIZATION
. SETTING VOLUME
MEASURE DISTANCE
MEASURE FREO CHAR
MEASURE VOLUME
Skipped if you selected
BEAM OPTIMZ only in
step 5.
If an error occurs, an error message is displayed. See
"Error messages for AUTO SETUP" on page 33 for a
complete list of error messages and their proper
remedies. Follow the instructions and perform the
AUTO SETUP procedure again.
AUTO SETUP
PREPARATION
. ENVIRONMENT CHECK
;;;[OK]
WILL START in 10 SEC
Move aside or behind YSP
*****-----
If you selected BEAM
OPTIMZ only in step 5.
31