Loading Settings - Yamaha YSP-800 Bedienungsanleitung

5
Press / to select USER1, USER2 or
USER3 and then press ENTER.
The following screen appears on your TV.
ENTER
6
Press ENTER again.
The new parameters are saved as USER1, USER2 or
USER3. Once the parameters are saved, the display
returns to the SET MENU screen.
ENTER
7
Press MENU to exit.
The SET MENU screen disappears from your TV.
MENU
ENTER
2)MEMORY SAVE
USER1 Save Now?
[ENTER]:Enter
2)MEMORY SAVE
USER1 Saving !
[<]/[>]:Select
SET MENU
. ;MEMORY
;AUTO SETUP
;BASIC SETUP
;MANUAL SETUP
[ ]/[ ]:Up/Down
[ENTER]:Enter

Loading settings

You can recall the settings saved in "Saving settings" on
page 34 according to the varying conditions of your
listening environment.
1
Press YSP on the remote control to switch to
the operation mode of this unit.
YSP
2
Press MENU on the remote control.
The SET MENU screen appears on your TV.
MENU
y
• The control buttons used for SET MENU are displayed on
the bottom of the screen.
• To return to the previous screen while using SET MENU,
press RETURN on the remote control.
• To resume cursor button operations after changing the
control area by pressing an input selector button, press
TEST on the remote control.
• To cancel the SET MENU screen, press MENU once
more.
• You can also perform the following operations in the front
panel display.
• If you press an input selector button during the SET
MENU operations, the cursor buttons become ineffective.
In this case, press TEST once.
USING THE SYSTEM MEMORY
SET MENU
. ;MEMORY
;AUTO SETUP
;BASIC SETUP
;MANUAL SETUP
[ ]/[ ]:Up/Down
[ENTER]:Enter
35