Using Manual Setup - Yamaha YSP-800 Bedienungsanleitung

MANUAL SETUP

Using MANUAL SETUP

Use the remote control to access and adjust each
parameter.
YSP
5BEAM
1
STEREO
4
MUSIC
7
SPORTS
0
CH LEVEL
TEST
y
You can adjust the SET MENU parameters while the unit is
reproducing sound.
1
Press YSP on the remote control to switch to
the operation mode of this unit.
2
Press MENU on the remote control.
The SET MENU screen appears on your TV.
MENU
y
• The control buttons used for SET MENU are displayed on
the bottom of the screen.
• To return to the previous screen while using SET MENU,
press RETURN on the remote control.
• To resume cursor button operations after changing the
control area by pressing an input selector button, press
TEST on the remote control.
• To cancel the SET MENU screen, press MENU once
more.
• You can also perform the following operations in the front
panel display.
• If you press an input selector button during the SET
MENU operations, the cursor buttons become ineffective.
In this case, press TEST once.
64
INPUTMODE SLEEP
ST+3BEAM 3BEAM
2
3
TARGET
5 6
MOVIE VOL MODE
8 9
OFF
SURROUND
+10
CINEMA DSP
MENU
ENTER
RETURN
YSP
SET MENU
. ;MEMORY
;AUTO SETUP
;BASIC SETUP
;MANUAL SETUP
[ ]/[ ]:Up/Down
[ENTER]:Enter
3
Press / to select MANUAL SETUP and
then press ENTER.
The following screen appears on your TV.
ENTER
4
Press / to select a sub menu and then
press ENTER.
ENTER
5
Press / / /
each parameter.
6
Press MENU to exit.
The OSD disappears from your TV screen.
ENTER
;MANUAL SETUP
. 1 SOUND MENU
2 BEAM MENU
3 INPUT MENU
4 DISPLAY MENU
[ ]/[ ]:Up/Down
[ENTER]:Enter
ENTER
and ENTER to configure
ENTER
MENU