Product Description - Kübler Sendix S3674 Betriebsanleitung

In the encoder system described here, the incremental in-
formation is provided by means of an analog sine-cosine
(SinCos) signal. The absolute information is transmitted in the
form of a digital data word (BiSS or SSI).
2.5 Foreseeable Misuse
The measuring system is not suitable for the following uses:
• Under water.
• In publicly accessible areas.
• Outside of the specifications stated in the data sheet..
• In areas where more serious EMC events may occur than
those defined in the standard.
2.6 Other Applicable Documents
Reference to the data sheet
All technical data, as well as the mechanical and electrical
characteristics, are specified in the data sheets of the corres-
ponding device variant, for special versions in the.corres-
ponding customer drawing of the product.
The above mentioned documents, the original declarations of
conformity and the relevant certificates can be downloaded
from our homepage:
www.kuebler.com/docufinder
BA Sendix® S3674 / S3684 - R60071.0009 - 03
NOTICE
.

3 Product Description

3.1 Technical Data
Reference to the data sheet
All technical data, as well as the mechanical and electrical
characteristics, are specified in the data sheets of the corres-
ponding device variant, for special versions in the.corres-
ponding customer drawing of the product.
Observe the configuration
The performance characteristics and the mechanical design
of the product depend on the selected configuration (accord-
ing to order code).
Extracts of the main technical data are listed below. All other
characteristic values can be found in the corresponding
product data sheets.
3.1.1 Approvals
The product meets the following criteria:
• Compliance with the European Directives:
NOTICE
NOTICE
EN - 17