Charging The Vehicle - Mennekes Amedio Professional+ Serie Betriebs Und Installationsanleitung

If the authorisation process is not completed, the following
problems may exist:
Problem
f Create customer in Backend-
Unknown custom-
er number.
f Check settings in the Backend-
Your account has
not been acti-
f Make sure that the customer
vated.
No communica- f Repeat the authorisation pro-
tion between the
device and the
Backend-System.
7.2

Charging the vehicle

T
WARNING
Risk of injury from using unsuitable aids
Use of adaptor plugs, extensions, or additional charging
cables in connection with the device can result in electric
shock or cable fire.
f Use only the charging cable intended for the vehicle
and the device.
f Do not use adaptor plugs, extensions, or additional
charging cables to charge the vehicle.
Fig. 23: Charging the vehicle (example)
36
Solution
system.
system.
is activated in the Backend-
system.
cess.
9
The authorisation process is complete.
f Ensure that the vehicle and the charging cable are suit-
able for Mode 3 charging.
f Connect the charging cable to the vehicle.
For Professional+ (PnC) 22 (customized-1) versions only:
f Flip up the hinged lid (1).
f Fully plug the charging plug into the charging socket of
the device.
For Professional+ (PnC) 22 T2S versions only:
f Insert the plug into the charging socket on the device.
The contour of the grey ring indicates the orientation
of the plug.
f Turn charging plug 60° counterclockwise to open the
shutter.
f After opening the shutter, insert the charging plug
completely into the charging socket.
9
The charging plug is automatically locked and the
charging process is started.
If charging does not start, the following problem may exist:
Problem
Interlocking of the
charging plug is not
possible.
1
Solution
f Check charging socket for for-
eign objects.
f Check charging cable and
replace if necessary.