Mennekes Amedio Professional+ Serie Betriebs Und Installationsanleitung Seite 71

Hostname (binary DNS host name or IP address of the
OCPP) binary OCPP proxy server for the
Backend-System
Port number (binary TCP port of the proxy server for
OCPP) binary communication with the
Backend-System
WebSockets JSON WS / WSS-URL of the OCPP
OCPP URL of the Backend-System
Backend
WebSockets keep- WebSockets keep-alive interval (in
alive interval seconds)
HTTP Basic Password for HTTP Basic
Authentication pass- Authentication
word
Tcp Watchdog Time until a restart will be exe-
Timeout cuted, after the connection to the
Backend-System has been inter-
rupted or could not be restored
Enable cache Setting that specifies whether an
internal cache will be used for the
RFID-UID
List of entries in Listing of the RFID-UIDs present in
cache the internal cache
Cache expiry mode The expiration date of cache ent-
ries, if the OCPP expiration date has
not been specified by the Backend-
System
Cache learning mode Activates the teaching of RFID UIDs
via the RFID card reader. The ent-
ries are stored in the internal cache.
Local fixed authoriza- Setting that specifies whether a
tion list (FLL) local authorization list will be used
for the RFID-UIDs
List of entries in FLL Listing of the RFID-UIDs in the local
authorization list
FLL learning mode Activates the teaching of RFID UIDs
via the RFID card reader. The ent-
ries are stored in the local authori-
zation list.
This setting input box must remain empty
Charging
system
Preset: "444"
„ Only for "OCPP-J 1.6".
„ ID of the charging point is automati-
cally attached when connecting to the
Backend-System
„ The value "0" prevents the keep-alive
Backend- interval
System „ Information will be provided by your
Backend-System provider
„ An empty field prevents the HTTP
Basic Authentication.
„ Information will be provided by your
Backend-System provider
The value "0" prevents a restart of the
Charging device
system
"Off": RFIDs will not be added to the inter-
nal cache
„ Syntax: UID1:UID2:UID3 ...
„ Max. 80 RFID-UIDs
Preset: 2038 (latest permissible time)
The function remains active for 5 minutes
Authori-
zation
„ Syntax: UID1:UID2:UID3 ...
„ Max. 80 RFID UIDs are displayed
The function remains active for 5 minutes
EN
27