Operation - Bosch MCM640604 Gebrauchsanleitung

en

Operation

12 Stirring whisk
13 Disc holder
14 Slicing reversible disc – thick / thin
15 Shredding reversible disc –
coarse / fi ne
16 Chipper disc *
17 Asian vegetable disc *
18 Citrus press *
a Strainer basket
b Pressing cone
19 Dicer with drive shaft *
a Drive shaft
b Base holder
c Catch
d Blade insert
e Slicing disc
f Blade cover
g Cutting grid cleaner
20 Universal cutter *
a Jug with drive
b Lid
21 Blender
a Blender jug with drive
b Lid
c Feed tube
d Hopper
22 Accessories bag *
* Depending on the model
Operation
Before using the appliance and accessories
for the fi rst time, clean thoroughly; see
"Cleaning and servicing".
Caution!
Use only the rotary switch to switch
the appliance on or off. Switching off
the appliance by opening the lid will
damage the appliance.
Important!
Bowl, lid/jug of the universal cutter and
blender jug are not suitable for use
in the microwave!
Preparation
■ Place the base unit on a smooth, stable
and clean surface.
■ Pull cable out of the base unit to the
required length.
18
12_MCM640604_8001028714.indb 18
Bowl with accessories/tools
W Risk of injury from the rotating tools!
While the appliance is operating, never
place fi ngers in the mixing bowl. Always use
the pusher for adding ingredients.
After switching off, the drive continues
running for a short time. Change tools only
when the drive is at a standstill.
Caution!
The appliance can only be switched on to
process food in the bowl when the bowl is
attached and when the lid is attached and
screwed on tight.
Universal blade
for cutting, mincing, mixing and
kneading.
W Risk of injury from sharp blades!
Do not touch blades of the universal blade
with bare hands. When not in use, always
store the universal blade in the blade guard.
Take hold of the universal blade by the
edge of the plastic handle only.
Kneading hook
for kneading dough and mixing-in
ingredients that ought not be cut
(e.g. raisins and chocolate chips).
Stirring whisk
for cream, beaten egg white and
light dough. Not suitable for solid
ingredients.
Before using, fi t stirring whisk.
Insert stirring whisk into drive housing and
lock into position (Fig. B-5b).
Fig. B
■ Attach the bowl (arrow on bowl on dot
on the appliance) and rotate as far as
possible in a clockwise direction.
Inserting universal blade/kneading hook:
■ Press the drive shaft into the tool holder
until it locks into position.
■ Insert tool holder into the bowl.
■ Place universal blade/kneading hook into
the tool holder and let go.
Inserting stirring whisk:
■ Insert drive shaft into the bowl.
■ Attach stirring whisk with a slight rotation
to the drive shaft.
03.12.2015 15:17:35