Pairing The Signals From The Device - Beurer PM80 Gebrauchsanleitung

Pairing the signals from the device

The digital transmitter and receiver have to be paired. If you buy
each device separately, e.g. as a replacement, or if you change the
batteries, then you have to pair the devices before use.
The devices have to be switched on for this operation. To do this put
on the chest strap, activate the Speedbox and switch on the scale by
pressing it slightly with your foot.
MENU
OPTION/SET
OPTION/SET
OPTION/SET
START/STOP
Downloaded from www.Manualslib.com
Change into the
is displayed.
Limits
is displayed.
Units
is displayed.
Pair NewDev
is displayed. Your HR
Hr Search
monitor starts to search for the de-
vices. You can follow the success of
the search on the display:
signals that the chest strap
HR-Belt
has been successfully connected.
signals that the Speedbox
SPD Dev
has been successfully connected.
signals that the scale has been
Scale
successfully connected. If the scale
has switched itself off automatically
in the meantime, then switch them
on again.
manuals search engine
menu.
Setting
22