Speed And Distance; Overview; Change Speed Units - Beurer PM80 Gebrauchsanleitung

S
PEED AND DISTANCE

Overview

IMPORTANT: All settings in this menu only have
an effect if the Speedbox is used!
You can also use the Speedbox only to measure
your pace. Please note that the recording cannot
be transmitted to the PC. To be able to transmit,
the HR monitor needs a heart rate signal. There-
fore put the chest strap on briefly at the begin-
ning of the recording.
In the
Spd'nDist
Change the speed units. In the basic setting

[cm], you can change from [km/h] to [min/km],
in the basic setting [inch] from [mi/h] to
[min/mi].
Calibrate the Speedbox.

With

distances can be displayed in the bottom line.
As soon as you are in the
HR monitor changes automatically into the main
display. This displays the current speed in the
middle line. The bottom line displays the average
heart rate.

Change speed units

As some people prefer to have the speed display in a particular unit
when training, two different units are offered as an option. Many
runners prefer the information in min/km instead of km/h.
Downloaded from www.Manualslib.com
menu you can:
, information on the speed /
manuals search engine
menu, your
Spd'nDist
35
G
B