Operation - Silvercrest SMS 300 A1 Bedienungsanleitung Und Sicherheitshinweise

Operation

WARNING! RISK OF INJURY!
► Never look into the UV-C lamp
► Never use the appliance on people or animals! UV radiation can lead to
injuries to eyes and skin.
► Only operate the appliance when it has been properly assembled.
This is the only way to avoid the dangers of UV radiation.
► Use this appliance only as described in these operating instructions.
This is the only way to avoid the dangers of UV radiation.
NOTE
► Use the appliance only if it is completely and correctly assembled. The
dust container
and undamaged. If dirt gets into the motor of the unit, it could cause motor
damage.
► Make sure that the safety switches of the UV-C lamp
of the appliance are not blocked.
► Test the appliance on a small, unobtrusive spot first.
1) Plug the power plug into a properly installed, easily accessible wall outlet.
2) Place the appliance flat on the surface to be cleaned.
3) Press the On/Off switch
Make sure that the On/Off switch
The appliance starts vacuuming.
4) Press the vibration button
shakes up the surface to be cleaned and the swirled up dust is sucked in
through the suction opening
on the UV-C lamp
5) Move the appliance evenly over the surface to be cleaned.
6) After vacuuming, press the On/Off switch
7) Unplug the appliance from the mains socket.
SMS 300 A1
8
during use!
3
and the HEPA dust filter
2
to turn on the appliance.
2 fully engages.
w
to activate the vibration head
9
. Pressing the vibration button
8
.
4
must be inserted correctly
8
on the underside
7
. The vibration
w
also switches
2
to turn off the appliance.
GB │ IE │ NI │ CY │
9 ■