Pan/Tilt Settings; Using The Pan/Tilt Setup Menu - Panasonic WV-CW960E Bedienungsanleitung

WV-CW960_US 05.11.18 11:08 ページ31

PAN/TILT SETTINGS

■ Using the Pan/Tilt Setup Menu

Display the pan/tilt setup menu from the setup menu to
configure pan and tilt settings.
First, display the pan/tilt setup menu.
1. Display the setup menu (page 25), move the cursor
to PAN/TILT O, and then press the CAM (SET)
button.
This will display the pan/tilt setup menu.
* The following sections numbered q to !4 explain
how to use each of the pan/tilt setup menu items.
(1) Position Number Selection (PRESET)
Positions can be assigned numbers, each of which can
be configured
monitoring conditions.
You can use either the PRESET item or the MAP item on
the pan/tilt setup menu to select a position number.
Position numbers 1 through 4 are used for alarm
functions (pages 40 and 41) and operating them.
1. Move the cursor to the 1 next to the PRESET item,
and then tilt the joystick left or right to change the
position number to the one you want.
2. Press the CAM (SET) button.
This registers the position number setting and
displays the preset setting menu.
(2) Position Number Selection (MAP)
You could use the MAP item on the pan/tilt setup menu
instead of the PRESET item to select a position
number.
1. Move the cursor to MAP O, and then press the
CAM (SET) button.
Downloaded from www.Manualslib.com
**PAN/TILT SETUP**1/2
q
PRESET 1
MAP
e
HOME POSITION OFF
SELF RETURN OFF
t
AUTO MODE OFF
AUTOPAN KEY AUTO PAN
u
PATROL
PRIVACY ZONE OFF
o
IMAGE HOLD OFF
DIGITAL FLIP ON
!1
PROPO.P/T ON
**PAN/TILT SETUP**2/2
!2
AREA TITLE ON(USER)
TILT ANGLE 0°
!4
CLEANING OFF
RET TOP
with a monitoring position
PRESET NO. 1*
POSITION SET
PRESET ID ON
ALC/MANUAL ALC
AF MODE MANUAL L
DWELL TIME 10S
SCENE FILE
OFF
PRESET SPEED ••••••I255
L H
RET TOP DEL
manuals search engine
2. Move the cursor to the number you want to select,
and then press the CAM (SET) button.
w
This registers the position number setting and
r
displays the preset setting menu. (this page)
y
To select a position number in the range of 033 to
i
064, move the cursor to 33-64 in the lower left corner
!0
of the menu, and then press the CAM (SET) button.
Preset numbers set subsequently are the same.
!3
Notes:
• An asterisk (*) to the right of a position number
indicates that it already has a preset position
assigned to it.
and
The home position number is indicated by the
letter H next to the asterisk.
• When the cursor is located at a position number
that has a position ID, the position ID text
appears next to ID: on the menu screen.
● Position Setting (POSITION SET)
See pages 23 and 24 for information on the setting
method.
● Adjusting Camera Position When
Changing Cameras (PAN OFFSET SET)
See page 24 for information on the setting method.
● Preset ID Setting (PRESET ID)
See pages 24 and 25 for information on the setting
method.
● Light Control (ALC/MANUAL)
See pages 26 and 27 for information on the setting
method.
You can adjust the lens iris setting on the detailed
menu when MANUAL is set.
-31-
**PRESET POSITION**
1* 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
17 18 19 20
21 22 23 24
25 26 27 28
29 30 31 32
ID:DOOR
033-064 225-256
RET TOP
**PRESET POSITION**
33 34 35 36
37 38 39 40
41 42 43 44
45 46 47 48
49 50 51 52
53 54 55 56
57 58 59 60
61 62 63 64
ID:
065-096 001-032
RET TOP