Panasonic WV-CW960E Bedienungsanleitung Seite 50

WV-CW960_US 05.11.18 11:08 ページ50
Poor picture colour
Image flicker
Afterimages in
the picture
Black and white picture
Frequent switching
between the colour and
the black and white
modes
White specks in the
picture
A circular object
appear in the picture
(when the camera is
pointing straight down)
Menu does not open.
Downloaded from www.Manualslib.com
Problem
• Check the white balance setting.
• Use the special setup menu to adjust picture
• Is the dome cover or lens of the camera dirty? If so,
• If Super Dynamic 3 is turned on, turn it off.
• Check the DNR setting.
• The camera has an auto black and white switching
• Adjust the black and white mode switching level,
• Use the PIX OFF function to perform blemish
• This is caused by the shape of the dome cover and
• Is the camera connected correctly? See the
• Are camera communication settings configured
manuals search engine
Cause and Recommended Action
quality.
clean them.
mode function. Check the setting of this mode.
and the duration time setting.
compensation.
is not a malfunction.
operating instructions that come with the system
controller you are using.
correctly?
-50-
Reference Pages
29
42
7
26-27
29
29
29
42
7
—
13-15
19-20
21