Pan/Tilt Settings; Using The Pan/Tilt Setup Menu - Panasonic WV-CW960/G Bedienungsanleitung

PAN/TILT SETTINGS

■ Using the Pan/Tilt Setup Menu

Display the pan/tilt setup menu from the setup menu to
configure pan and tilt settings.
First, display the pan/tilt setup menu.
1. Display the setup menu (page 25), move the cursor
to PAN/TILT O, and then press the CAM (SET)
button.
This will display the pan/tilt setup menu.
**PAN/TILT SETUP**1/2
PRESET 1
MAP
HOME POSITION OFF
SELF RETURN
AUTO MODE
AUTOPAN KEY
PATROL
PRIVACY ZONE
IMAGE HOLD
DIGITAL FLIP
PROPO.P/T
**PAN/TILT SETUP**2/2
AREA TITLE
TILT ANGLE
CLEANING
RET TOP
* The following sections numbered q to !4 explain
how to use each of the pan/tilt setup menu items.
(1) Position Number Selection (PRESET)
Positions can be assigned numbers, each of which can
be configured with
monitoring conditions.
You can use either the PRESET item or the MAP item on
the pan/tilt setup menu to select a position number.
Position numbers 1 through 4 are used for alarm
functions (pages 40 and 41) and operating them.
1. Move the cursor to the 1 next to the PRESET item,
and then tilt the joystick left or right to change the
position number to the one you want.
2. Press the CAM (SET) button.
This registers the position number setting and
displays the preset setting menu.
PRESET NO.
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
RET TOP DEL
(2) Position Number Selection (MAP)
You could use the MAP item on the pan/tilt setup menu
instead of the PRESET item to select a position
number.
1. Move the cursor to MAP O, and then press the
CAM (SET) button.
q
w
e
r
OFF
t
OFF
y
AUTO PAN
u
i
OFF
o
OFF
!0
ON
!1
ON
!2
ON(USER)
!3
0°
!4
OFF
a monitoring position
1*
ON
ALC
MANUAL L
10S
OFF
••••••I255
L H
2. Move the cursor to the number you want to select,
and then press the CAM (SET) button.
This registers the position number setting and
displays the preset setting menu. (this page)
To select a position number in the range of 033 to
064, move the cursor to 33-64 in the lower left corner
of the menu, and then press the CAM (SET) button.
Preset numbers set subsequently are the same.
Notes:
• An asterisk (*) to the right of a position number
indicates that it already has a preset position
assigned to it.
and
The home position number is indicated by the
letter H next to the asterisk.
• When the cursor is located at a position number
that has a position ID, the position ID text
appears next to ID: on the menu screen.
● Position Setting (POSITION SET)
See pages 23 and 24 for information on the setting
method.
● Adjusting Camera Position When
Changing Cameras (PAN OFFSET SET)
See page 24 for information on the setting method.
● Preset ID Setting (PRESET ID)
See pages 24 and 25 for information on the setting
method.
● Light Control (ALC/MANUAL)
See pages 26 and 27 for information on the setting
method.
You can adjust the lens iris setting on the detailed
menu when MANUAL is set.
-31-
**PRESET POSITION**
1* 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
17 18 19 20
21 22 23 24
25 26 27 28
29 30 31 32
ID:DOOR
033-064 225-256
RET TOP
**PRESET POSITION**
33 34 35 36
37 38 39 40
41 42 43 44
45 46 47 48
49 50 51 52
53 54 55 56
57 58 59 60
61 62 63 64
ID:
065-096 001-032
RET TOP