Construction - Panasonic WV-CW960E Bedienungsanleitung

WV-CW960_US 05.11.18 11:08 ページ10

CONSTRUCTION

Camera Safety Wire
Ensuring Trouble-free Operation
• This camera uses a "slip ring" for transmission of electrical power and signals. A dirty slip ring can cause
deterioration of picture quality during panning and generation of noise.
In order to ensure trouble-free camera operation, make sure that the cleaning function (page 38) is turned on.
• If cleaning the slip ring does not eliminate poor picture quality and noise, it could mean that the slip ring has
reached the end of its service life. Contact a qualified service person or system installer to have it replaced.
Downloaded from www.Manualslib.com manuals search engine
Alarm Input Connector
Alarm Output Connector
Video Output Connector
Data Port
Attachment Pipe
Upper Base
Rear sun shield (provided)
Front sun shield (provided)
Sun shield (pre-attached at factory)
Dome cover (do not remove)
Lens The lens cannot replaced.
-10-
Power Connector
for WV-CW960
Power Connector
for WV-CW964