Scope Of Supply; Approval Marks; Safety; Intended Use - Conel CLEAR FILL Montage- Und Betriebsanleitung

26
Where heating circuits are protected with inhibitors, a check must be performed at the
end of filling to determine whether the inhibitor concentration is adequate!
3.2

SCOPE OF SUPPLY

/ Heating circuit refill unit
/ 2x female-female coupler ¾"
/ Installation and operating instructions
/ Maintenance instruction for pipe disconnector
Immediately after unpacking please check the shipment for completeness and any transport damage; it will
not be possible to acknowledge subsequent claims.
3.3

APPROVAL MARKS

The heating circuit refill unit complies with the technical regulations for drinking water installations ac-
cording to DIN EN 1717and DIN EN 12729. The DVGW approval marking has been awarded.
4

SAFETY

4.1

INTENDED USE

Both installation and use of the heating circuit refill unit are subject to the applicable national regulations.
Alongside the operating instructions and the legal regulations applicable in the country and place of use in
respect of accident prevention, the recognised technical regulations for safe and professional work must
be observed.
The heating circuit refill unit is manufactured according to the state of the art and recognised German
safety regulations.
The heating circuit refill unit may only be used as described in the operating instructions. Any other use or
use beyond the specified use is considered to represent incorrect use.
DW-6370CR0445
Fig. 1: DVGW marking