Quicke Q-Companion BT Originalbetriebsanleitung Seite 8

Overview
1.3. Weighing view
In the Weighing view you can perform load weighing. To be able to enter the Weighing view, the selected implement has to be
calibrated for load weighing, see 2.2.6. Calibrate load weighing, as well as having its level position set, see 2.2.5. Calibrate
level position.
The weight of the load is estimated by continuously measuring the hydraulic pressure in the cylinders while inside the
weighing range during a lift cycle.
Each weighing calibration consists of two reference lifts, one with a known reference weight and the other with the implement
empty. By using two lifts, the weight can be estimated by interpolating between the two reference lifts.
5
4
3
2
1
1. Setpoints
2. Weighing range (grey filled)
3. Loader height (0-100%)
4. Implement angle
5. Implement angle deviation
6. Activity timer
7. Weighing mode indicator
8. Home screen
9. Setup weighing
magnus
00:56:34
0
31
1575
bucket / gravel
17 16
Fig.3 Load weighing view
6 7
14:56
Auto
13
79000
51625
kg
15
10. Number of added lifts
11. Target weight
12. Select weighing mode
13. Sum
14. Activity recording
15. Tare indicator
16. Weight
17. Lower loader indication
6
8
9
10
11
12
13
14