Herunterladen Inhalt Inhalt Diese Seite drucken

Quicke Q-Companion BT Originalbetriebsanleitung Seite 28

Fahrerunterstützungssystem
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Operation
-
Always use full deflection on joystick when
weighing and make sure the lifting motion is
smooth, to avoid oscillations in the measured
pressures.
For best accuracy, the same engine speed shall
-
be used for the load weighing lifts as the
calibration lifts.
Maintenance
-
Maintain your loader in good condition. Things
like excessively worn bushings and pivot pins
as well as lack of lubrication to these areas can
have an adverse effect on weighing accuracy.
After any major servicing, particularly if worn
components have been replaced or welding
repairs have been carried out, the weighing
system should be recalibrated. Cavitation in the
hydraulic system can cause weighing errors.
This risk is greatly reduced if the oil level in the
tractor hydraulic system is kept according to the
manufacturer's specification.
3.1.2. Lifting procedure
A correct lifting procedure is important to get the best weighing accuracy. The load shall be lifted smoothly and consistently,
but with full joystick deflection, through the weighing range.
Procedure
Pick up the load.
Make sure the loader is below the weighing
range, and that the implement angle is at the
desired position.
-
The required implement angle is
indicated by the green marker.
The marker indicates the implement
angle used when calibrating the
selected implement.
-
Incorrect implement angle is
indicated by the Implement indication
figure.
-
The Lower loader indication is lit
until the loader is below the Weighing
range.
-
A weighing lift cannot be started until
both the Implement angle deviation
and Lower loader indication are
turned off.
14:56
magnus
Auto
13
0
31
79000
51625
1575
bucket / gravel
Fig.30 Lower the loader.
14:56
magnus
Auto
13
0
31
79000
51625
1575
bucket / gravel
Fig.32 The loader is in the correct
position.
26
magnus
0
31
kg
bucket / gravel
Fig.31 Adjust the implement angle.
magnus
0
43
kg
bucket/ gravel
Fig.33 The implement is in the
correct angle.
14:56
Auto
13
79000
51625
1575
kg
14:56
Auto
13
79000
51625
1575
kg

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Quicke Q-Companion BT

Inhaltsverzeichnis