Quicke Q-Companion BT Originalbetriebsanleitung Seite 18

Setup
bucket
Select
Calibrate level position
Weighing calibrations
Edit name
Delete
1. Select Weighing calibrations
and confirm with check mark.
New calibration
Add a known weight and position
the implement so that the round
indicator turns green
4. Add a known weight and
position the implement so that
the round indicator turns green.
Confirm with check mark.
New calibration
Position empty implement so that
the round indicator turns green
7. Empty and position the
implement so that the round
indicator turns green. Confirm
with check mark.
Weighing calibrations
gravel
New calibration
2. Select New calibration and
confirm with check mark.
New calibration
Lift until the round indicator turns green
5. Do a smooth lift with full
joystick deflection until the round
indicator turns green. Press check
mark when done.
New calibration
Lift until the round indicator turns green
8. Do a smooth lift with full
joystick deflection until the round
indicator turns green. Press check
mark when done.
Fig.14 Calibrate load weighing
16
New calibration
Select weighing range suitable for
the implement and confirm
STANDARD
Buckets Forks
Silage
Bale grabs
3. Select weighing range suitable
for the implement and confirm.
New calibration
Enter known weight to continue
700 kg
6. Enter the weight of the
calibration weight. Confirm by
pressing right when on the last
digit.
New calibration
Successfully calibrated.
Confirm to save.
9. Press check mark to confirm.