Quicke Q-Companion BT Originalbetriebsanleitung Seite 13

1. Select language. Confirm with
check mark.
Product setup
Set time format
24 h
12 h
4. Select time format. Confirm
with check mark.
Product setup 14:56
Set date
2017 - 12 - 11
YYYY - MM - DD
7. Adjust date. Confirm with
check mark.
Product setup 14:56
Set tool carrier to max dump position
and confirm to proceed
10. Control the tool carrier to
mechanical stop and confirm with
check mark.
Product setup
Set loader type
Self levelling
Non self levelling
2. Select loader type. Confirm
with check mark.
Product setup
Set time
_
_
14 : 52
HH : MM
5. Adjust time. Confirm with
check mark.
Product setup
14:56
Set loader to lowest position and
hold until round indicator turns green
min
8. Hold the loader against the
mechanical stop with full joystick
deflection until indicator turns green
(3 - 4 s). Confirm with check mark.
Product setup
14:56
Setup ready!
11. Press check mark to confirm
Fig.7 Setup
11
Product setup
Set units
Metric (kg)
Imperial (lb)
3. Select unit. Confirm with
check mark.
Product setup
Set date format
YYYY-MM-DD
MM-DD-YYYY
DD-MM-YYYY
6. Select date format. Confirm
with check mark.
Product setup
14:56
Set loader to highest position and
hold until round indicator turns green
max
9. Hold the loader against the
mechanical stop with full joystick
deflection until indicator turns
green (3 - 4 s). Confirm with check
mark.
Setup