Error List - Quicke Q-Companion BT Originalbetriebsanleitung

Operation
The system keeps track of any error or warning that the
system detects. When a fault is active, the system will show
a warning symbol in the status bar.
When the warning-symbol is turned on, it means that an active fault is present in the system. To view the active and previously
active fault, press the button for error list and then View.
Diagnostics
Lifting time _ _ _ hrs
Dump time _ _ _ hrs
Oper. time _ _ _ hrs
Load cycles _ _ _
Loader type: Self levelling
To clear all the previously active faults, press button for error list and then Clear.
To view detailed information about a fault select the fault and press confirm.
Please see chapter 4. Trouble shooting for help in troubleshooting or chapter 5. Error code for a list of error codes.

Error list

Loader lights [520448]
Lift angle sensor [520461]
Fig.51 Error or warning
Error list
View
Clear
Fig.52 Warning-symbol
520448 Activation of loader lights
Status: Active
FMI: Current below normal (5)
Occurrences: 1
Node address: 0x90
Fig.53 View detailed information
34
magnus
0
43
bucket / gravel
Error list
Loader lights [520448]
Lift angle sensor [520461]
Loader lights
failed.
14:56
26