Factory Reset; Display Name - Quicke Q-Companion BT Originalbetriebsanleitung

Setup

2.3.6. Factory reset

The factory reset will restore the system to its initial state, as when leaving factory, except for:
- Operating time
- Working times
- Load cycles
Note! Users, implements and all the activity data, stored in the display, will be lost.
Settings
User settings
Diagnostics
Maintenance
Loader setup
Display settings
Factory reset

2.3.7. Display name

The display name is used to identify the display. It is shown in the mobile app when synchronizing activity data.
Settings
User settings
Diagnostics
Maintenance
Loader setup
Display settings
Factory reset
1. Select Display settings and
press confirm.
Factory reset
Continue to delete all implements,
calibrations, activities and reset all
settings.
Fig.23 Factory reset
Display setings
Date / Time
Language
Backlight
Units
Display name
Display version
2. Select Display name and press
confirm.
Fig.24 Display name
22
Factory reset
Confirm to delete all implements,
calibrations, activities and reset all
settings.
Display name
Edit name
e _
q-c 612
3. Change name by pressing up or
down and right or left. Confirm
name by pressing right on the last
character.