Quicke Q-Companion BT Originalbetriebsanleitung Seite 31

0
bucket / gravel
3.1.6. Remove last weight
If the latest measured weight was added to or subtracted from the accumulated sum by mistake, you can remove that action by
pressing Weight settings and then Remove last weight. The accumulated sum, weighing lift counter and target weight (if active)
will then be restored to their previous values, before the weight was added or subtracted.
Note. You can only undo the latest weighing that was performed.
0
bucket / gravel
3.1.7. Target weight
You can enter a target weight, for instance when loading
a trailer, to avoid overloading. The target weight will
automatically decrease as weights are added to the
accumulated sum. It will help you keep track of how much
is left to load.
You set or clear the target weight by pressing Weight settings, Target weight and then Set or Clear.
14:56
magnus
Auto
13
43
79000
51625
1575
kg
Fig.40 Accumulated sum
14:56
magnus
Auto
13
43
79000
51625
1575
kg
Fig.41 Remove last weight
Weight settings
Remove last weight
Remove tare
Clear sum
Target weight
Weight settings
Remove last weight
Remove tare
Clear sum
Target weight
magnus
0
43
bucket / gravel
Fig.42 Target weight
29
Operation
14:56
Auto
13
79000
51625
1575
kg